Two-Stroke Piston CrownsDetailed Inspection followed by Pre-machining in way of damaged crown top, worn ring grooves and other affected areas to the base metal. More>

Four-Stroke Piston CrownsMachining and Grinding of ring grooves to remove the worn and damaged material. More>

Cylinder CoversDetailed Inspection and Pre-machining in way of burnt area to base metal. More>

Piston SkirtsRemoval of existing rubbing bands and Pre-inspection and MPI check. More>

Exhaust Valve Spindles and SeatsPre-inspection for wear and damage, followed by Pre-machining to remove all fatigued material. More>

Exhaust Valve Housings and CagesPre-inspection of eroded and corroded areas, followed by Pre-grinding to remove all fatigued and burnt material. More>

Piston RodsPiston rods are Ground undersize or brought to standard size, as per OEM recommendations. More>

Cylinder HeadsChemical Cleaning to de-carbonise and Pre-inspection of cylinder heads. More>

Cylinder LinersPre-inspection to determine wear and damage of liners. More>

Turbocharger Casings Pre-inspection of eroded and corroded areas, followed by Pre-grinding to remove all fatigued and burnt material. More>

Crankshaft Grinding Crankshafts are Ground undersize as per OEM recommendation. More>

Hard Chrome and Nickel Plating Cylindrical shafts, piston crowns, electrical rotor journals, valve spindle stems, compressor crankshafts. More>

Thermal Spray Thermal Spray Processes such as High Velocity Oxygen Fuel (HVOF), Plasma Spray, Twin Wire Arc Spray and Powder Metal Spray. More>

Re-Metalling Babbit Bearings Re-babbiting of white metal bearings. More>

Metal Stitching A cold repair process of cracked or damaged components where weld repair is not possible. More>

In-Situ Machining On-site Machining, Welding, Drilling, Line Boring and Vertical Boring. More>

Refurbishing of Connecting Rods The big-end bore is restored to standard size and the small-end bore is renewed using spares. More>

Foundry Ferrous and non-ferrous castings of parts and components. More>

Heat Treatment Various heat treatment processes are carried out as per job requirements. More>

Welding and CNC Machining Various welding processes and full range of CNC machining can be carried out. More>